VDE multifunction side-cutter
The VDE multifunction side-cutter offers six functions in one tool: It is suitable as an insulation stripper, flat cutter, side cutter and for the crimping of wire end ferrules. Furthermore, brass screws can be cut and lugs bent. Exceptional ergonomics guarantee precise and low-fatigue work in this case.
Bent at right angle pliers head
Two-component grip with slip-off protection
Shearing off of M3.5 / M4 brass screws
Insulation stripping of 1.5 / 2.5 mm2 cores, Bending of lugs with ø 4 - 6 mm, Crimping of sleeves with ø1.5 - 2.5 mm
| Art.Nr: | 31501 |
| Length: | 180mm |
| MH: | 3,5 |
| H: | 2,5 |
| P: | 2,0 |
| Weight: | 270g |
| MH: | 800 N/mm2 or MPa tensile strength for medium-hard wire / 23 HRC | ||||
| H: | 1,600 N/mm2 or MPa tensile strength for hard wire / 47 HRC | ||||
| P: | 2,000 N/mm2 or MPa tensile strength for piano wire / 54 HRC | ||||
